Fully adjustable articulating arm allows many options for viewing your riders. Large tournament style. 7 inch x 13 inch convex mirror. Ball joint mount on the back of the mirror allows additional pivot point for the best adjustments. 2.5" Clamp with neoprene liners to accommodate down to 2.375". 2.25". and 2" round tubing. Billet machined 6061 T-6 aluminum and finished with a high polish
Specs:
Polished Aluminum Arms
Center pivot allows you to position the mirror for the best viewing (Note: Most single arm mirrors don't work right on towers)
Tournament CONVEX Mirror 7" x 13"
Stainless Steel Fasteners
Fits the following round tubing sizes:
1.875"
2"
2.25" (2 1/4")
2.375" (2 3/8")
2.5" (2 1/2")
Most aftermarket wakeboard tower mirrors use a single piece arm. This means that you mount it to the tower and there is no adjust-ability to it. Where you mount it is what you see. When using an articulating arm. you have so many options for adjustment. Since we use a 2 piece arm. there are actually more points that you use for adjustment.
With a large 2.5 inch clamp we can accommodate not only all Big Air towers. but other manufacturers as well. We provide liners to accommodate down to 2.375 inch. 2.25 inch. 2 inch. and 1.875 inch tubing as well.
Install your mirror higher or lower on the tower. the choice is yours. You can even mount on the top of the tower onto the Top Bar or H-Member. Installation is so simple. and we know you'll love that!
Tired of the cheesy windshield mount mirror? Step up to a Tower Frame - Articulating Mirror
